tv unit model

tv unit model

This is a tv unit model. Its height is up to the height of the sliding window.

It has a self on one side which is 6 inches deep. 

Put steel leg under the TV unit Because the steel leg will not spoil it with water.

With this design, you will get a good TV unit ready for less cost.

tv unit model size

The top self is 18 inches and the middle is 15 inches and the bottom is 12 inch self.

The box is make on its side, it has a 5 inch deep.

tv unit models box height is 12 inches and the length is 12 inches. Fit a small light inside it.

Open in which you can fit glass self.

take LED light on all four sides of the TV unit so that it will look more beautiful.

The height of this tv unit is 7 feet and the width is 6 feet.

You can take a TV of up to 42 inches.

If you want to take a bigger TV  then you have to increase its width.

Put a socket on the back of the TV unit so that the pin of the TV is fitted in it so this is not visible.

Put a light box above the box of the TV unit.

You can also take the advice of an architect.

so that it can give you the design according to the place.

besides, you take two colour sunmica.

one colour self, drawer and the box above, and the other place the second sunmica.

so this look beautyfull.

center table in front of tv

It has a center table in front of it.

Fit steel leg under the center table as it gets spoiled due to water, instead you can also put a wheel.

its width is 2 feet and length is 30 inches and height is 18 inches.

it has both side drawers, above it is 12mm glass, glass is 3 inches above.

You can buy online –https://www.urbanladder.com

3 thoughts on “tv unit model”

Leave a Comment

Your email address will not be published. Required fields are marked *