partition design for living room and dining hall

partition design for living room and dining hall

plywood partition

Hello friends, this  is  Partition Design for Living Room and Dining hall. Its width is 11 feet with 3 feet of door and height is 7 feet.

It has storage under it and there is openbox above which is for holding flowers and photos.

It is up to the height of the door. This will make your hall look very beautiful.

also readhall design for home

wall partition design for living room and dining hall size

it will look very beautiful in the middle of it, you can do CNC cutting by applying 12mm MDF to Sunmica, below this you can put 4 inch leg so that it Do not spoil it with water.

You can apply coluor glass or design glass on top of this design, take the deep 12 inches of the box below so that a lot of your stuff will come in it.

There are 6 pillars inside the design, inside the box, you can also reduce the pillar, which will increase the width of the box slightly.

Take 6 inches of the middle box which is covered with white sunmica.

If there is space on the side of the door, then you can make a showcase if there is no space, then you leave it till the door.

You should replace the ply doors in the box with glass doors (profile) which will make it look more beautiful.

partition design for living room and dining hall colors

You can make it according to your space, in which you can apply white sunmica to the inner box and dark sunmica to the rest of the place.

You can also take the advice of the architect. He will give you a good design according to the place.

You can also adjust this partition design for living room according to the place.

Do not put door between kitchen and hall.

Because it has to be opened and closed again and again so there is no need for a door here.

you can buy online –https://www.urbanladder.com

 

1 thought on “partition design for living room and dining hall”

Leave a Comment

Your email address will not be published. Required fields are marked *