bed design back

bed design back

This is new bed design back. it is up to the height of the door. it is cnc cutting in mdf.

inside which you can put the tubelight.

So that the acrylic sheet brings out the light bar and the MDF design can be seen completely.

you can visit- hydraulic bed with storage

 size of bed design  

it is 4 fit height and has a cushion down it.

The bed design back side has 12mm MDM CNC cutting and a 6mm acrylic seat is fitted behind it.

you can also apply a tubelight of color so that it will look very beautiful.

This bed is 18 inches with height and its width is 6 feet and length is 7 feet.

It has a trolley in one side and behind it there are doors in the top side to keep you from making the trolley.



It will be easy and you will not have to lift the gadi and you will be able to keep the goods easily.

The height of the bed is 18 inches including the mattress, so you do not have trouble sitting.

Place a space of 4 – 5 inches behind the MDF so that the tubelight lights do not remain in one place.

and it can spread all around. put 4 tube lights in it.

If your room is big, you make it in the middle. If your room is small then you make it by touching the wall.

Take out the top of the bed on all three sides, so that the bed looks good.

put white sunmica under it and dark sunmica on the top side.

Make a side box of which you take the height of the bed.

Box top of that you make a light box on which you can charge the mobile laptop and you can turn the tube light and fan on.
 

bedroom back design back color

In this you paint white on the wall and apply more dark sunmica.

If you apply more white sunmica, then the whole look will become white and it will not look good.

you can buy- https://www.pepperfry.com/